Filter
Top Products
Preparations
Precaution on battery use
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below.
<Place batteries with their terminals corresponding to the (+) and (–) indications.
<Different types of batteries have different characteristics. Do not mix batteries of different types.
<Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and/or cause old
batteries to leak chemicals.
<Remove batteries as soon as they are non-operable. Chemicals that leak from batteries can cause a rash. If chemical leakage
is found, wipe with a cloth.
<The batteries supplied with the product may have a shorter life expectancy due to storage conditions.
<If the remote control is not used for an extended period of time, remove the batteries from the remote control.
Using the Remote Control
<Use the remote control by pointing it towards the remote sensor window of the set.
Objects between the remote control and sensor window may prevent proper operation.
Cautions regarding use of remote control
<Do not expose the remote control to shock. In addition, do not expose the remote
control to liquids, and do not place in an area with high humidity.
<Do not install or place the remote control under direct sunlight. The heat may cause deformation of the unit.
<The remote control may not work properly if the remote sensor window of the main unit is under direct sunlight or strong
lighting. In such a case, change the angle of the lighting or LCD TV set, or operate the remote control closer to the remote
sensor window.
Batteries for the Remote Control
If the remote control fails to operate the LCD TV functions, replace the batteries in the remote control.
<(Slide the cover while pressing
down.)
<(Place the batteries with their terminals
corresponding to the (+) and (–)
indications in the battery compartment.)
Open the battery cover.
1
Insert two size-AAA batteries.
2
Replace the cover and slide in
reverse until the lock snaps.
3
Note: This illustration is for reference only. The remote sensor may be in different locations on
different models.
5
To open or close the back cover
When you finish connecting, aim the Hook
toward the Locating groove, then carefully push
the Cover until the Cover locks in place with a
click.
Push downward and then
pull out the cover carefully
in the direction of the arrow
to remove the cover.
Push downward and then pull out the cover
carefully in the direction of the arrow to
remove the cover.
3
0
3
0
5m