Audiovox LCM1502TV TV DVD Combo User Manual


 
-28-
Troubleshooting
PROBLEM SOLUTION
Poor TV Reception
Perform auto programming of
the tuner
Verify antenna condition.
NOTE: Due to the nature of TV
signals, vehicle motion,
direction the vehicle is facing,
distance from the transmitter,
nearby surroundings and
weather may adversely affect
TV reception. These
conditions may result in the
following: picture roll, “snowy”
picture, or momentary loss of
color. Please refer to page 2
for more information on TV
reception.
Poor radio reception (FM
modulator installed)
Check the condition of the
vehicle’s radio antenna.
Verify that the antenna is fully
raised
If a wired RF modulator has
been installed, verify that it’s
switch is turned to the off
position
No power to LCD
Verify +12VDC on red wire at
power harness going to the
video pod. Verify ground
connection.
Power but no video or
sound
Verify connections at both
ends of source component
harness.
IR sensor inoperative
Verify that the batteries in the
remote are fresh
Verify that the remote eye is
not obstructed.
Verify that the infrared
transmitter is affixed over the
sensor eye of the component
to be controlled
Specifications
LCD Brightness 450 nits (min)
Operation Temperature -20°C~ 65°C
Storage Temperature - 40°C ~ 80°C
Video Display System NTSC
Audio Output 0.6W (Variable)
Current Draw 3.2A
Weight 6 kgs
Overall Dimensions 15.5”x14.5”x2.5”
(H x W x D)