Aurora Multimedia ICS-SP20 TV Receiver User Manual


 
ICS-SP20 User Manual
5
6 Connections
6.1 A/V & Control connectors
Composite video input
S-Video input (4-pin mini DIN)
Audio inputs (Left and Right RCA Phono are shared for Video and S-Video)
IR Input for direct connection of IR from IR control devices.
Example of interconnections for a display device, ICS-SP20, DVD/VCR (or other source of video),
and TV antenna or cable is shown below. Note that standard RCA cables for audio and video connections,
standard S-Video cable, or RF antenna cables are not supplied with the ICS-SP20.
6.2 RF connector
The coaxial connector (ANT) of ICS-SP20 is RF signal input – either aerial or cable TV, UHF/VHF,
if the ICS-SP20 shall be used as TV tuner.
6.3 RJ11 Service Port connector
RJ11 connector of ICS-SP20 is used as a service port for Sony. Nothing should be connected to this
port.
Warning: Damage may occur if plug into a different port such as a phone line. This will void the
warranty.