Filter
Top Products
User Guide P. 17
Missing a Start or a Stop Confirmation
If you have not received a Start or the Stop confirmation after pressing the button, simply press
the
button. Pressing the button will refresh the display and will confirm if the vehicle was
started or stopped.
No Start Confirmation Was Received:
If after remote starting the vehicle no confirmation was received, simply press the button, this
will refresh the display. If the vehicle was started successfully, the icon will appear as well as
the run time countdown. Pressing the button will also lock all doors (the lock icon will appear).
If the doors were already locked prior to pressing the button, there will be no change in the
status of the doors i.e. the doors will remain locked.
On models where starter kills were installed, pressing the button will also activate the starter
kill.
No Stop Confirmation Was Received:
If after remote stopping the vehicle no confirmation was received i.e. the display did not return to
its basic state simply press the button, this will refresh the display. If the engine was
stopped, the icon will disappear and the time will be displayed.
Pressing the button will also lock all doors (the lock icon will appear). If the doors were already
locked prior to pressing the button, there will be no change in the status of the doors i.e. the
doors will remain locked.
On models where starter kills were installed, pressing the button will also activate the starter
kill.
Multi-Level Features (default state)
The multi-level features allow you to access different features of your vehicle or of a second car by
pressing the button once, twice or three times. By default, the multi-level features are
programmed as follows:
Basic Features (press the button 1X)
¾ : .........................................................aux 2
¾ .............................................................cold weather
Multi-Car Operation (press the button 2X)
¾ ¾ :..........................2
nd
car lock
¾ ¾ : ...........................2
nd
car unlock
¾ ¾ :............................ 2
nd
car start/stop
¾ ¾ :............................ 2
nd
car trunk
Customized Features (press the button 3X)
(May not be compatible with some vehicles)
Your installer can add customized features such as turning on the radio, opening sliding doors, etc.
¾ ¾ ¾ : customized feature 1
¾ ¾ ¾ : customized feature 2
¾ ¾ ¾ : customized feature 3