Filter
Top Products
NOTE: With a USB device or memory card connected to the USB port or card reader, the DXP-1000 G2
can play MP3, WMA, and JPEG files. The player will play certain video files using the USB port and
Memory Card reader.
3. Video Setup
The player’s TV output color is selectable to either
PAL or NTSC.
If the TV set is NOT a multi video system, and the following is observed on the TV screen, it could be a result
of the wrong color system matched to the TV set. Symptoms of a mismatch are,
Picture is distorted
Picture is black and white with no color
Picture is not full screen, or the border portion of the picture is blocked
NOTE: The DVD Player is set to NTSC system output by default. If you are not playing in
the U.S.A. or know you are on a PAL system, please change the output system of the
player using the steps below.
1. Set the TV set’s system to the proper setting, or
2. Change the DVD player’s output system setting as following:
• Press Open on the remote control and keep the DVD tray open, and then
• Press SETUP on remote control,
• Go to the PREFERENCES page
• Select the TV Mode then choose Pal, NTSC, or Auto
NOTE: If the above steps DO NOT fix the problem, see the TROUBLESHOOTING
section of this manual.
17