Filter
Top Products
BEOVISION MX AND AUDIO SYSTEM
30
Video sound in audio speakers – or vice versa
If you connect your Bang & Olufsen
audio system to your BeoVision MX
and have a pair of loudspeakers
connected to the audio system, you
can obtain the benefits of an
integrated audio and video system*.
You can then hear any source you like
in the loudspeakers of either system.
You can, for example, hear a music
video through your audio speakers
while you are watching it on the TV
screen, or you can play the radio or
any other audio source on the
BeoVision MX speakers.
To enable an integrated audio and video system
setup, BeoVision MX and your Bang & Olufsen
audio system must be interconnected by a special
BeoLink cable which is available at your Bang &
Olufsen dealer.
Audio/video recording
The sound you hear in the audio speakers can
be recorded on the audio tape recorder. See
how in the User’s guide for your audio system.
Likewise, the sound you hear in the BeoVision
MX speakers can be recorded on a video tape
recorder, if any such exist in your setup. If only
sound is heard, that is, if the TV screen is blank
you will record sound only, but if the sound is
accompanied by pictures, the pictures will be
recorded along with the sound produced by the
audio system – a simulcast recording.
Note: A special recording lock function ensures
that you cannot switch to another programme
while the recording is in progress.
*Please note: Not all types of Bang & Olufsen
audio systems support audio/video integration
with the BeoVision MX. Please contact your Bang
& Olufsen dealer for further information.
Video sound in audio speakers…
Switch on to a TV programme
Press LIST until AV* is displayed
Press to activate the audio/video
function
Press to switch the sound to the
audio speakers
Press LIST until AV* is displayed
Press to activate the audio/video
function
Press to play the radio on the TV
speakers
Press to play the CD on the TV
speakers
Press to play the audio tape on the
TV speakers
If you want sound from the BeoVision MX on your
audio system speakers and a blank TV picture
screen, press LIST until AV* is displayed, then TV…
Audio sound in video speakers…
TV
then
TV
then
SAT
or
V TAPE
or
then
RADIO
then
or
A TAPE
or
CD
*Note: In order to display AV on Beo4, you must
add the function to Beo4’s list of functions.
Please refer to Beo4’s own User’s guide for further
instruction.
GO
GO
then
LIST
LIST