Filter
Top Products
ENGLISH
U-PHONO UFO202 User Manual
5
Set your recording program on your computer to RECORD, •
and begin playing the start of the tape or record immediately
after.
Let the audio play all the way through the rst side. Once the •
music stops, press STOP on the recording program.
Flip the tape or record over and repeat the recording process. •
Once both sides are recorded, you may edit the le to cut out •
any extra time before or after the audio was captured. You
may also cut the long track into individual songs and save
the les separately. This process differs slightly depending on
what program you are using, so refer to the software manual
for editing procedures.
You can play back your stereo recorded audio through the •
UFO202 RCA outputs and PHONES output. You may want to
apply equalization or other processing if your software
application is so equipped.
If you plan to burn these les to a CD for use in a home stereo •
or car, save the audio in WAV format.
Audio Connections
Although there are various ways to integrate the UFO202 into
your studio or live set-up, the audio connections to be made will
basically be the same in all cases:
Wiring
Please use standard RCA cables to connect the UFO202 to other
equipment:
You can also use a ¼" adapter cable:
Headphones connection
The UFO202 is provided with a headphones jack. Here, you can
connect any standard pair of stereo headphones with a ⅛" TRS
connector.
Specifications
LINE IN
Connectors RCA, unbalanced
Input impedance approx. 27 kΩ
Max. input level 2 dBV
LINE OUT
Connectors RCA, unbalanced
Output impedance approx. 400 Ω
Max. output level 2 dBV
DIGITAL OUTPUT
Socket Toslink, optical cable
Output format S/PDIF
PHONES OUT
Socket ⁄" TRS stereo jack
Output impedance approx. 50 Ω
Max. output level -2 dBu, 2 x 3,7 mW @ 100 Ω
USB 1.1
Connectors type A
DIGITAL PROCESSING
Converter 16-bit converter
Sample rate 32.0 kHz, 44.1 kHz, 48.0 kHz
SYSTEM DATA
Frequency response 10 Hz to 20 kHz, ± 1 dB @ 44.1 kHz sample rate
10 Hz to 22 kHz, ± 1 dB @ 48.0 kHz sample rate
THD 0.05 % typ. @ -10 dBV, 1kHz
Crosstalk -77 dB @ 0 dBV, 1 kHz
Signal-to-noise ratio A/D 89 dB typ. @ 1 kHz, A-weighted
D/A 96 dB typ. @ 1 kHz, A-weighted
POWER SUPPLY
USB connection 5 V , 100 mA max.
DIMENSIONS/WEIGHT
Dimensions (H x W x D) approx. 22 mm (0.87") x 88 mm (3.46") x
60 mm (2.36")
Weight approx. 0.12 kg
BEHRINGER always takes great care to ensure the highest standard of quality. Any modifications
which may be necessary will be made without prior notification. Technical data and appearance of the
equipment can therefore differ from the details or illustrations shown.
shield
sleevesleeve
tip tip
SleeveSleeve
TipTip