Filter
Top Products
19
7.2.5.1-DNR (Noise reduction)
You may reduce interference and noise
formed in the picture by using this feature.
Select DNR tab with the Up/Down
movement buttons to activate this feature and
select one of the Off, Low, Normal, High
or Auto options with Right/Left movement
buttons.
Note: Noise reduction function is only
effective in weak broadcasts.
7.2.5.2-MPEG NR
You can remove the artifacts that appear in
the picture as square shaped blocks by using
this feature. Select Mpeg NR tab with the
Up/Down movement buttons to activate this
feature and select one of the Off, Low, Mid
or High options with Right/Left movement
buttons.
7.2.5.3- Vibrant Colour
With this feature you can automatically adjust
colour saturation according to the scene. To
do this, select Vibrant Colour tab with the
Up/Down movement buttons and select
one of the Off, Low, Mid or High options
with Right/Left movement buttons. With
the ‘High’ option you can obtain the most
saturated colours.
7.2.5.4- Perfect Clear
With this feature you can automatically adjust
black level of the picture according to the
scene. To do this, select Perfect Clear tab
with the Up/Down movement buttons and
select one of the Off, Low, Mid or High
options with the Right/Left movement
buttons.
7.2.5.5-Dynamic Contrast
This feature allows making brightness settings
according to the picture. A brighter or dimmer
picture can be sent to the screen according
to the brightness level of the picture. Thus, a
wider effect is obtained in terms of contrast.
Select Dynamic Contrast tab with the Up/
Down movement buttons to activate this
feature and select one of the Off, Low, Mid
or High options with Right/Left movement
buttons.
7.2.5.6-DynamicBacklight
With this feature you can automatically adjust
backlight strength according to the average
brightness in the scene. To do this, select
DynamicBacklight tab with the Up/Down
movement buttons and select one of the
Auto, Daylight, Night or Off options with
Right/Left movement buttons. When the
Dynamic Backlight is set to Off, Backlight
option becomes active. Backlight option
is not accessible when other options are
selected.
7.2.5.7-Backlight
With this feature, you can adjust the intensity
of light reflected to the LCD Panel. To do this,
select BackLight tab with the Up/Down
movement buttons and adjust the level as you
desire with Right/Left movement buttons.
7.2.6-Picture Format
With this option, you can view the broadcast
you watch in a format of your choice. You
can view the broadcasts in Auto, 16:9,
4:3, Subtitle, Letterbox, Panorama or 14:9
formats. 16:9 or 4:3 formats can be selected
in PC modes. In that case, the name of the
selected picture format will be displayed in the
centre of the screen.
7.2.6.1- Auto
Some movie channels may broadcast in
the 16:9 format. If you would like to see this
format automatically, then select Auto. In that
case, Auto appears on your screen.
7.2.6.2-16:9
Please use this setting for watching wide
screen DVDs, wide screen video cassette
or 16:9 formatted broadcasts. Since various
screen formats such as 16:9, 14:9 and etc.
are used, black stripes might be formed on
the lower and upper parts of the screen.