Filter
Top Products
7
4 Start
Remove your television carefully from its box.
You can keep the packaging of your television
to use in future.
Contents of the box
Power cable
Remote control
2 batteries
Note: Scart, HDMI, VGA and PHONO
cables are not supplied with the device.
4.1-Aerial connection
4.2-Powering on your device
and the initial use
1. Insert the power cable into the power
supply input located on the back panel of the
LCD TV.
2. Insert the power cable plug supplied with
the tv into the mains socket.
Note: Your TV is equipped to operate with
TV buttons in case your R/C is broken or the
batteries are exhausted.
3. Press the power on/off button
located on the LCD TV.
4. To power on your television,
press PR+ or PR- keys on the
remote control. For this process,
you can also use the buttons on
your TV. The picture will appear on
the screen after a short while.
Note: If you are not going to use your
television for a long time, unplug its power
cable from the socket.
4.3-Performing initial start and
settings
To set up your television, read the sections
on the TV controls and making the channel
settings.
4.4-Batteries
Open the lid of the battery compartment
and make sure that you have placed the
batteries in the correct direction. For this
remote control, UM-4, IEC R03 or AAA 1.5 V
batteries are suitable.
Do not throw your old batteries into the fire,
discard them in a dedicated waste area for
this purpose.
Do not mix used batteries with new ones or
different types of batteries together.
The performance of the remote control will be
reduced at a distance of 8 meters from or at
an angle of 30 degrees beyond the centre of
the TV.