Belkin AV62300-16 TV Cables User Manual


 
RazorVision
Video Enhancement Cable
Troubleshooting Guide (continued)
Specifications
Symptom Solution
I get a picture but no sound.
1.
If you are using DVI connections
on either your TV or your source
device, then you must use separate
audio cables.
2.
If you are using HDMI connections
on both your TV and source device,
check the menu settings on your
source and/or display to adjust
audio for HDMI.
TV and source device are
both on but RazorVision
is off.
1.
Check power connection
to RazorVision.
2.
Push the “Status” button at the
front of the RazorVision until it
shows either “On” or “Split”.
Television system supported:
ATSC (Advanced Television Systems Committee)
Supports the following display resolutions
for televisions/projectors:
480i, 480p, 720p, 1080i
Supports display resolutions for computer
monitors up to 1024x768
Supports HDMI specifications, revision 1.1
Supports HDCP specifications, revision 1.1
Power Requirements:
Input:
AC 120V, 60Hz
Output:
5V, 1.1A
Replacement Power Supply:
Part Number RV60001-06
11