Filter
Top Products
Setting up Your TV 5
English
Setting up Your TV
Connecting the Power Cord
1. Connect the female end of the AC power cord to the AC input on the TV.
2. As shown in the diagram, connect the male end to a wall power outlet.
• This product must be operated only from the type of power source indicated on the marking
label (AC 100~240V 50/60 Hz).
• If the TV will not be used for a long period of time, it should be unplugged from the wall outlet.
Connecting the Antenna
Connecting CATV
Your BenQ TV has an internal 75 ohm coaxial cable connector, so antennal hook-up is very
easy.When connecting a 75-ohm coaxial cable to your BenQ TV, secure it firmly to the
ANTENNA connector. Some cable TV companies provide "pay per view" programming. Since
the signal for these paid channels is encoded, most cable TV companies provide their own
tuners/ decoders. You must install a tuner/ decoder to be able to view locked encoded
programming. If you require special instructions on how to install cable service, please contact
your cable TV provider. The tuner/decoder provided by your cable TV company can be used
according to the following instructions.
Please note: you must have an RF switch with two inputs (A and B) (not supplied).
The "A" input on the RF switch (not supplied) allows you to use the TV's channel selector
button to view unlocked channels. The "B" input on the RF switch (not supplied) allows you to
use the channel selection button on your cable box to view locked encoded programming via the
tuner/decoder.
Household power outlet
Power cord