Filter
Top Products
Introduction10
Controls and functions
Projector
9. POWER indicator light
Lights up or flashes when the projector is
under operation.
10. AUTO
Automatically determines the best picture
timings for the displayed image.
11. Right/
Increases the projector volume.
When the On-Screen Display (OSD)
menu is activated, the #6, #5, and #11
keys are used as directional arrows to
select the desired menu items and to
make adjustments.
12. POWER
Toggles the projector between standby
mode and on.
13. SOURCE
Displays the source selection bar.
1. Focus ring
Adjusts the focus of the projected image.
2. TEMPerature warning light
Lights up red if the projector's
temperature becomes too high.
3. LIGHT indicator light
Indicates the status of the light source.
Lights up or flashes when the light source
has developed a problem.
4. MENU/EXIT
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings.
5. Keystone/Arrow keys ( / Up, /
Down)
Manually corrects distorted images
resulting from an angled projection.
6. Left/
Decreases the projector volume.
7. MODE/ENTER
Selects an available picture setup mode.
Activates the selected On-Screen Display
(OSD) menu item.
8. ECO BLANK
Used to hide the screen picture.
1
5
4
6
7
8
2
3
9
10
12
11
13
5