BenQ MK2442 Flat Panel Television User Manual


 
English
Section 1: Quick Start Guide 7
8. Connect the power cable
1. Locate the power cable from the packaging, and plug the appropriate end into the AC
IN socket on the rear of the TV (as illustrated below).
2. Connect the other end into an appropriate wall power outlet, the TV will enter
standby mode and the power indicator (on the front lower center) will light up
orange.

• Thetypeofpowercableplugandsocketillustratedmaydifferfromthetypeusedinyourregion.
• Onlyuseanappropriatepowercableforyourregion.Neveruseapowercablewhichappears
damaged or frayed. Never change the plug type on a power cable. Be aware of total loading when
using extension cords or multiple outlet power boards.
WARNING:
This TV has been engineered and manufactured with the highest priority on safety, however,
IMPROPER HANDLING OR USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR
FIRE HAZARD. Please handle this TV with care. If damaged, turn off the power and unplug the
power cable from the TV. Transport the TV to your nearest BenQ authorised service centre for
repair.
Downloaded From TV-Manual.com Manuals