Filter
Top Products
English
Using the remote control 19
Using the remote control
Power on, off and standby
Turning on the TV
After plugging the TV's power cable into a wall outlet, the TV will enter standby mode
automatically. The power indicator will light up orange. Press Power on the remote
control. The TV will turn on and the power indicator will change to blue.
Putting the display to standby
Press Power on the remote control again, and the TV will return to standby mode. The
power indicator will turn orange.
The display still consumes a very small amount of power (about 1W) in standby mode.
Switching inputs
to the display.
• BeawarethatHDMIinputmustbeHDCP-complianttobedisplayed.
When switching to the HDMI inputs, the display needs several seconds to detect the HDCP
information from the signal source and no image will be displayed during this period. This is
not a malfunction.
Adjusting sound setting
Adjusting volume
• PressVOL on the remote control to increase volume. The volume indicator
increases in length as volume rises.
• PressVOL on the remote control to decrease volume. The volume indicator
decreases in length as volume falls.
Mute setting
Press MUTE on the remote control to turn off the sound temporarily.
Press
MUTE once more, or press VOL or VOL to restore the sound level.
Selecting a TV sound mode
Press TV AUDIO on the remote control to toggle TV sound among available modes. (The
modes available will depend on the TV or Video sound system being received).
1. Turn on all connected equipment or
devices before selecting an input.
2. Press
INPUT on the TV to view
the current selected input. Press
INPUT button, use
▲▼
button to
select your desired input then press
OK button to confirm. You can
also press
INPUT continuously
to switch between different input
sources.
• Theseoptionswillonlyappearwhen
corresponding signals are connected
Downloaded From TV-Manual.com Manuals