BenQ MS500-V Home Theater Screen User Manual


 
Operation 39
Function Description
Teaching
Template
(only for
MX501/
MX501-V)
Provides several preset patterns for various teaching purposes.
Choose Blackboard or Whiteboard first by pressing / and press
/ to choose the pattern you need. Press MODE/ENTER to activate
the pattern.
Picture Mode
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type. See "Selecting a
picture mode" on page 27 for details.
Reference
Mode
Selects a picture mode that best suits your need for the image quality
and further fine-tune the image based on the selections listed on the
same page below. See "Setting the User 1/User 2 mode" on page 27 for
details.
Brightness
Adjusts the brightness of the image. See "Adjusting Brightness" on page
28 for details.
Contrast
Adjusts the degree of difference between dark and light in the image.
See "Adjusting Contrast" on page 28 for details.
Color
Adjusts the color saturation level -- the amount of each color in a video
image. See "Adjusting Color" on page 28 for details.
This function is only available when a Video, S-Video or
Component Video signal is selected.
Tint
Adjusts the red and green color tones of the image. See "Adjusting Tint"
on page 28 for details.
This function is only available when a Video or S-Video signal is
selected and the system format is NTSC.
Sharpness
Adjusts the image to make it look sharper or softer. See "Adjusting
Sharpness" on page 28 for details.
This function is only available when a Video, S-Video or
Component Video signal is selected.
Brilliant Color
See "Adjusting Brilliant Color" on page 28 for details.
Color
Temperature
See "Selecting a color temperature" on page 28 for details.
3D Color
Management
See "3D Color Management" on page 29 for details.
Save Settings
Saves the settings made for User 1 or User 2 mode.
1. DISPLAY menu
2. PICTURE menu