Filter
Top Products
43
Connecting with video equipment
Information menu
This menu shows you the current operating status of the projector.
Some picture adjustments are available only when certain input sources are in use. Unavailable adjustments
are not shown on the screen.
Password
Change Password
You will be asked to enter the current password before changing to a new one.
See "Utilizing the password function" on page 23 for details.
Power On Lock
Limits use of the projector to only those who know the correct password. See
"Utilizing the password function" on page 23 for details.
Key Lock
See "Locking control keys" on page 37 for details.
Reset All Settings
Returns all settings to the factory preset values.
The following settings will still remain: Keystone, Language, Projector
Position, High Altitude Mode, Password, Key Lock, and ISF.
ISF
The ISF calibration menu is password protected and only accessible by
authorized ISF calibrators. The ISF (Imaging Science Foundation) has developed
carefully crafted, industry-recognized standards for optimal video performance
and has implemented a training program for technicians and installers to use
these standards to obtain optimal picture quality from BenQ video display
devices. Accordingly, we recommend that setup and calibration be performed
by an ISF certified installation technician.
For more information, please go to www.imagingscience.com or
contact the place you purchased the projector.
Function Description
Source
Shows the current signal source.
Preset Mode
Shows the selected mode in the Picture -- Basic > Preset Mode menu.
Resolution
Shows the native resolution of the input source.
Equivalent Lamp
Hour
Shows the total lamp time used.
Firmware Version
Shows the firmware version of your projector.