Filter
Top Products
AC211A-R2 & AC216A-R2 Chapter 1 : INTRODUCTION (continued)
PAGE 7
1-5. INSTALLATION
IMPORTANT:
Please read all the safety instructions (pages 2 to 4) before starting.
• Table Top Mounting:
The devices can be used directly on a table: they are equipped with 4 plastic feet.
• Rack Mounting:
The AC216A-R2 is compatible with a 19" enclosure. To install the device into a 19” rack:
Attach the device to the rack by using 4 screws in the front panel holes (screws are not
included). Connect all of the cables to the devices and attach them to the rack with some tie
wraps.
IMPORTANT:
• The openings in the rear and side panels are for cooling. Do not cover these openings.
• Be sure that no weight is added onto the device in excess of 2 kg (4.4 lbs.).
• The maximum ambient operating temperature must not exceed 40°C (104°F).
• The rack and all mounted equipment in it must be reliably grounded to national and
local electrical codes.