Filter
Top Products
Chapter 3 Installation
LMC009A-R5 724-746-5500 | blackbox.com Page 7
3. Install the Compact Media Converter TP/BNC 50-ohm
The Compact Media Converter TP/BNC converters come ready to install.
Deploy Compact Media Converter TP/BNC units in pairs, or connect a
Compact Media Converter TP/BNC converter to another Black Box
converter. To install a Compact Media Converter TP/BNC converter, first
make sure that the unit is placed on a flat surface. Attach the cables
between the Compact Media Converter TP/BNC and each device that will be
interconnect, the plug the unit into a reliable, filtered power source. Make
sure to connect the BNC port of the Compact Media Converter TP/BNC
converter only to 50-ohm coaxial cable.
When connecting an Ethernet cable to the Compact Media Converter
TP/BNC, make sure the cable corresponds to the Crossover/Pass-Through
switch. When using the Crossover cable, make sure the switch is out, in the
“X” setting. The switch can be pressed again to change the setting.