Blaupunkt DVD-ME2 DVD Player User Manual


 
14
7. DVD Player Operations
After connection to the system is
completed according to Chapter 6, check
the operation by using the following steps.
STEP 1:
Press the POWER button. Starting logo is
then displayed on the screen.
When a disc is loaded
When a disc is not loaded
STEP 2:
Insert a disc, the player identifies disc type
automatically and disc type will be displayed in
the left top of TV screen. It will automatically
start to play.
STEP 3:
If the power button of the unit or remote
controller is pressed, the unit converts to
stand-by Mode (Blue LED "ON"). If the power
button is pressed again, the power turns on
(Blue LED "off") and the unit starts to play
(Blue LCD of window "ON").
7-1. TV Operation
(DVD-ME3 only)
STEP 1:
With Power "ON", press "DVD/TUNER/AUX"
button one time from DVD Mode, TV Channel
"2" is displayed as default value.
STEP 2:
You may select TV Channel by pressing "CH"
up & down button or Number key of Remote
Controller.
Ex): How to use Number key
To watch CH "15", press No. 1 and 5
each. It will display CH "15". To watch
Ch "4", press No. 4 only or press "0"
and "4" each. (The Maximum TV
Channel supported is up to CH 69)
STEP 3:
While watching TV, to get the TV channel
number displayed on the screen, please press
"display" button one time. If pressed again,
Channel No. will disappear. (However
Channel No. is displayed on the Unit)
STEP 4:
To change mode from TV, please press
"DVD/TUNER/AUX" button again. The Mode
will be displayed DVD > TV > AUX AV.
If TV signal is too low to watch, The screen
shall display Mute screen with the text of
"Weak TV signal...."
To watch other program or play game,
please press "DVD/TUNER/AUX" button
one more time from "TV" Mode.
ENGLISH
DISC LOADING
NO DISC
Caution
Do not insert a 3.1" (80mm) disc. This
unit is not designed for 80mm discs.