Filter
Top Products
Video Recorder 630/650 Series Operating instructions | en 43
Bosch Security Systems Installation and Operation manual F.01U.169.663 | v2.0 | 2012.02
5.7.2 Event search
1. From a Date/Time search, press the exit key to select the Search Tabs.
2. Press the left/right arrow keys to select Event Search.
3. Press the enter key to activate the search.
– With the mouse, click the Event Search tab to make it active.
Search criteria
–Under Start and End, fill in date and time values to determine the time span of the
search.
–Under Channel, specify the camera input to search for. The selected input will be shown.
–Set Event Type to search for alarm events, motion events, or both. Set to All so that the
search is not restricted by an event type.
– Select Search to start the search.
Search results
– The recording fitting the filter and closest to the selected date and time is shown first.
– If more events than can be shown on the page are found use Page to see more
results.
– Use the up/down arrow keys to move through the list.
– Press the Play button for a full-screen playback of the selected recording.
Figure 5.7 Search menu - Event Search options
Event Search results
The event search results are indicated by a start and stop time of a small period of video.
Within this period of video the event search results can be found.