Bosch Appliances DVR 440 DVR User Manual


 
38 en | Operating instructions Digital Video Recorder 440/480 Series
AM18-Q0605 | v2.0 | 2012.04 Installation and Operation manual Bosch Security Systems
5.6.3 Main menu
Camera
The Camera menu is used to configure recording settings for the unit. The menu contains
eight submenus:
Camera - per camera Enable, Name of the camera, Covert, and Audio
Video Adjustment - per camera Brightness, Contrast, and Color
PTZ - per camera Port, Address, Protocol, and Baud Rate
Continuous Recording - per camera Resolution, Quality, and Frame Rate
Input Recording - per camera Resolution, Quality, Frame Rate, Pre-event, and Post-
event
Motion Recording - per camera Resolution, Quality, Frame Rate, Pre-event, and Post-
event
Network Live Streaming - per camera Enable, Resolution, Quality, and Frame Rate
Video Format - NTSC, PAL, or Auto Detect; VGA Output - select required VGA
resolution
Schedule
The Schedule menu is used to set recording types according to the hour and day of the week
and for exception days.
Display
The Configuration menu contains three submenus:
Language - set the language option for the unit
Monitor A - show Camera Name and Status, Date and Time, Playback and HDD Status,
and configure Sequence Dwell Times
Monitor B - show Camera Name and Status, Date and Time, and configure Sequence
Dwell Times
Event
The Event menu contains four submenus:
Input - per input Input Type, Camera, Relay Output, and PTZ preset
Motion - per camera Sensitivity, Relay Output, and Area setup
Alarm Acknowledge - Toggle between Post-event time and Manual
System - enable alarms for Disk fail, Disk full, System/Disk temperature, Administrator
Password change, Video loss, and Power On.
Network
The Network information menu contains four submenus:
TCP/IP - enable DHCP, set IP Address, Subnet, Gateway, DNS, HTTP Port, and Bandwidth
limit
DDNS - set dynamic DNS for dyndns.org, sitesolutions.com, and tzo.com
Notification - send e-mail notification on Input, Motion detect, Disk fail, Disk full, System/
Disk temperature, Administrator Password change, Video loss, Power On
Mail - set SMTP server, SSL, User name, Password, To 1-3, From, and Subject.
System
The System information menu contains seven submenus:
Date/Time - set Date, Time, Date format, Time format, Time zone, and Daylight Savings
NTP - set NTP Time Server and Sync interval
Beeper - set unit to beep on Button, Input, Motion, System, or Video loss
User - set Usernames, Passwords, and User Levels for Users 1-10