Bosch Appliances DVR 440 DVR User Manual


 
78 en | Web Client Software Digital Video Recorder 440/480 Series
AM18-Q0605 | v2.0 | 2012.04 Installation and Operation manual Bosch Security Systems
3. Click and hold the left and right arrows to pan.
4. Release the mouse button to stop camera movement controls.
Zoom, focus, and iris
To control the zoom, focus, and iris of PTZ cameras:
1. Select the cameo of the camera to be controlled.
2. Click and hold the left zoom button to zoom out; click and hold the right zoom
button to zoom in.
3. Click and hold the left focus button for far focus; click and hold the right focus
button for near focus.
4. Click and hold the left iris button to close the iris; click and hold the right iris
button to open the iris.
5. Release the mouse button to stop camera adjustment controls.
Pre-position
To move the active camera to a pre-position:
1. Enter a pre-position number using the keyboard.
2. Click Shot (or press enter).
Click buttons one to six for immediate positioning to one of the first six pre-positions.
To store the current position of the camera in a pre-position:
1. Position the camera.
2. Enter a pre-position number.
3. Click Set.
Aux commands
Aux commands are special commands for controlling cameras. To switch on the Aux
command:
1. Enter an Aux number.
2. Click Aux + (or press enter).
3. To switch off the Aux command, click Aux -.
7.4.2 Camera views
To switch the display mode, click one of the camera view buttons to
change the cameo display configuration:
Single view, Quad view, and Sequence display modes are available.
Full Screen expands the current display mode to fill the entire screen. Press ESC to
exit Full Screen.