Filter
Top Products
19
English FrançaisEspañol
LISTENING TO YOUR LOCAL SOURCE
How a nearby sound source differs
Your PERSONAL
®
music center II is engineered for use with any
Bose
®
link enabled products in your expansion room.
For example, speakers connected to a Bose SA-2 or SA-3 amp
li-
fier respond to on and off commands from the PERSONAL
®
music
center II, as well as muting and volume changes.
On the other hand, a Bose 3•2•1 Series II or 3•2•1 GS Series II
sy
stem or a Bose Wave
®
music system connected in the expan-
sion room gives you another full sound source. If an SA-3
amplifier
in your expansion room has a TV or other audio component con-
nected, that too qualifies as a local sound source.
Because this local source is within view, you can see how it
r
esp
onds to commands from the PERSONAL
®
music center II by
observing its display panel.
Choosing and using your local source
This additional sound source is identified as Local in the list of
sources on your PERSONAL
®
music center II display.
Note:
Local is not an available selection when your PERSONAL
®
music center II is set for use in Room A.
To listen to your local source:
1. Press
to see the list of sources.
2. Move up or down to highlight Local and press in on the center
bar
to confirm the selection.
This turns on the nearby Bose link compatible system to the
volume, play medium (radio, CD, etc.), and preset (if that applies)
las
t selected.
What you ca
n do with it
If your local source has a display scr
een, refer to this display to
see the results of actions you take using your PERSONAL
®
music
center II.
The PERSONAL
®
music center II display (Figure 12) offers a
generic guide to the actions you can take.
Figure 12
Generic display for
the moves you
can make
Back Input
Local
— See Local Device —
Station/Folder/Disc
[123... ]
00_RC48 OG.book Page 19 Thursday, March 19, 2009 1:46 PM