Filter
Top Products
23
English FrançaisEspañol
BEYOND THE BASICS
The importance of room codes
Your PERSONAL
®
music center II is set at the factory for use in an
expansion room, while the LIFESTYLE
®
system media center and
primary remote are set for use in the main room. The use of unique
room codes lets your LIFESTYLE
®
system know where commands
that come to it originate, so it can respond in the appropriate
room.
With just one expansion room set up, the PERSONAL
®
music
center should remain set to Room Code B, as shown
(Figure 14).
Figure 14
Room Code B
setting, for one
expansion room
However, to use more than one PERSONAL
®
music center II,
or with other LIFESTYLE
®
system remotes for use in other rooms,
leaving them all set for Room B will not work.
When to change the room code
• If you have set up other expansion rooms already. There are14
room co
des in addition to Room A.
• If you prefer to use your PERSONAL
®
music center II in the main
room, in addition to the primary remote control, it must be set
for Room A.
• For use with an SA-2 or SA-3 amplifier the PERSONAL
®
music
center II must have an identical room code.
Like the PERSONAL
®
music center II, these Bose
®
link compati-
ble amplifiers are set at the factory for Room B. If you change
this
setting, because you have more than one expansion room
set up, your PERSONAL
®
music center II room code must
change to match it.
To learn how to choose a different room code, see “To change set-
tings for a feature” on page 21.
Note:
For more room code details, refer to the operating guide that
came with your LIFESTYLE
®
system.
00_RC48 OG.book Page 23 Thursday, March 19, 2009 1:46 PM