Filter
Top Products
5
English FrançaisEspañol
PREPARING FOR USE
Confirm that current settings are right
Your PERSONAL
®
music center II is pre-set at the factory for
compatibility, as follows:
• To control sound in a single expansion room – Room B – or area
(not in Room A, the location of your LIFESTYLE
®
media center).
• A house code identical to the one given every new LIFESTYLE
®
system.
For details, see “Why would you change the house code?” on
page 24.
• To receive Audio stream 2, which is different from the stream
th
at deliv
ers sound in the main room where the LIFESTYLE
®
media center is located.
For details, see “Audio streams multiply your options” on
page 24.
• English as the language used for display text.
With a LIFESTYLE
®
system previously set up and used with
another language, your PERSONAL
®
music center II detects the
difference (only the first time you turn it on), and pauses opera-
tion to switch to that language.
Note:
To learn how to select a different text display language for
your system, refer to “Media center opti
ons” in the Operating Guide
that came with the system.
If the above settings are right, you can begin to use your remote
now.
Change the settings, as needed
• Language: to change display text to your preferred language,
press the Setup button.
For further information on how to make the change, see “Adjust-
able features of the PERSONAL
®
music center II” on page 21.
• Room codes: to choose a different code that will either be
un
ique to your PERSONAL
®
music center II or the same as the
main room, see “The importance of room codes” on page 23.
• House codes: to learn how to match your PERSONAL
®
music
center II house code to one that has been changed in your
LIFESTYLE
®
primary remote, see “Why would you change the
house code?” on page 24.
• Audio stream: for instructions on changing streams and an
exp
lanation of your choices, see “Audio streams multiply your
options” on page 24.
00_RC48 OG.book Page 5 Thursday, March 19, 2009 1:46 PM