Filter
Top Products
DLP
™
Digital Projector User’s Guide
22
Setup Menu
PC Mode Video Mode
Frequency
Use arrow keys Left / Right (W/X) to adjust the sampling clock to
eliminate flicker.
Adjustment range: from low-high (0-100) by 31 steps.
(Default value: auto detected)
Tracking
Use arrow keys Left / Right (W/X) to adjust the sampling number.
Adjustment range: from low - high (0 – 100) by 100 steps.
(Default value: auto detected)
Video AGC
Use arrow keys Left / Right (W/X) to adjust the video automatic
gain control. Selection item: on / off.
(Default value: on)
Video Type
Use arrow keys Left / Right (W/X) to adjust the video source type.
Selection item: RGB / Y-Pb-Pr (HD) / Y-Cb-Cr (DVD)
(Default value: DVD)
Aspect Ratio
Use arrow keys Left / Right (W/X) to select the video aspect ratio.
Selection item: 4:3 & 16:9. (Default value: 4:3)
Projection Type
Use arrow keys Left / Right (W/X) to select different projection
type.
Selection item: Desktop Front/Rear, Ceiling Front/Rear.
(Default value: desktop front)
Volume
Use arrow keys Left / Right (
W
/
X
) to adjust the volume level.
Adjustment range: from low - high (0-8) by 8 steps.
(Default value: 4)
Keystone
Use arrow keys Left / Right (W/X) to adjust the keystone level of
display.
Adjustment range: from
to (0-100) by 32 steps.
(Default value: 50)
Reset
Use
↵
button to reset to default value.
In PC mode to reset aspect ratio, projection type, volume, keystone
to default value.
In Video mode to reset video AGC, video type, aspect ration,
projection type, volume, keystone to default value.