Filter
Top Products
Basic Operation
6
1.1 Setting Country and Language
After you have connected the Set Top Box follow the below steps to
begin the Installation Guide:
1. Press the Menu Button to enter the Main Menu.
2. Use the Navigation Buttons to select the SETUP sub-menu.
3. Then use the Navigation Buttons to select the Installation option.
4. Press the OK Button to then confirm.
When you have entered the Installation menu you will be asked to
set the Country and Language you desire. Follow the below steps to
confirm.
1. In the Installation option use the Navigation Buttons to select the
Country option.
2. Then use the Navigation Buttons to select the Country Setting.
3. Press the Navigation Buttons to select the OSD Language option.
4. Then use the Navigation Buttons to select and set a language.
1.2 Updating your Channel List?
You can update your channel list by conducting either an Auto Scan
or Manual Scan. Follow the below instructions on how to update
your channel list.
1.2.1 Auto Scan
Auto Scan will erase the channel list and scans for all available
stations. To conduct an Auto scan follow the steps 1-8 of section 1.1
and then press the Red Button on the remote control to check the
channel list is clear. Press the OK Button to confirm clear action and
start Auto Scan. Press the Exit Button to cancel and exit the Auto
Scan menu.
Figure 1. Clear database message
1.Quick Installation