Filter
Top Products
85/86/89 DVD player
80 series DVD player 19
Some televisions and monitors are equipped with component video
inputs and are capable of reproducing a progressively scanned video
signal. Connecting to these inputs allows you to view higher quality
pictures with less flicker.
To enable progressive scan via the component output please refer to
page 13 under general setup to explain how to access this in the menu.
CONNECTION TO A PROGRESSIVE SCAN TV/DISPLAY
If you find that you have no display but are
getting sound from your speakers, you have set
the DVD player to progressive scan mode.
Simply press the I-Scan button on your remote
control.
If your progressive scan TV has Y, Pb Pr video inputs you can use the
players Y, Cb/Pb, Cr/Pr outputs . Press the P-Scan button to switch the
p
l
ayer to the progressive scan video output mode.
If this player’s audio outputs are also connected to the TV, the L/R
channels of 2-CH OUT should be connected to the TV’s AUDIO IN
terminals.
It is imperative that you use high quality component video cables to
ensure the best possible performance.
Audio In
YY
PPrr
PPbb
Rear
Panel
NNoottee::
TV set with progressive-scan
video input
Audio Cord