Filter
Top Products
26
There is no power
Ensure the supplied AC adaptor is connected securely to the PSU socket on the rear panel.
Ensure that the correct mains transformer is being used and that it complies with the local electrical
supply.
Ensure the mains plug is fully inserted into the wall socket and is switched on.
There is no sound
Ensure that the amplifier is set correctly.
Check that the interconnects are inserted correctly.
Check that the correct digital input is selected (Incoming Sample Rate LED should be on).
A low hum or buzzing sound can be heard
Power cords or lighting placed near this product.
Analogue inputs are not securely connected.
Troubleshooting
Visit www.cambridge-audio.com and register to receive notification of future hardware and software releases.
This guide is designed to make installing and using this product as easy as possible. Information in this document has
been carefully checked for accuracy at the time of printing; however, Cambridge Audio's policy is one of continuous
improvement, therefore design and specifications are subject to change without prior notice. If you notice any errors
please feel free to email us at: support@cambridgeaudio.com
This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual
may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of the
manufacturer. All trademarks and registered trademarks are the property of their respective owners.
© Copyright Cambridge Audio Ltd 2008