Cambridge Audio DVD89 DVD Player User Manual


 
5
DVD89
Connections for most CD or DVD playback
If at all possible you will want to connect audio using digital cables
(either coaxial S/PDIF or optical S/PDIF). If your receiver or integrated
amplifier does not have Dolby Digital or DTS capability (for instance, an
older Pro Logic model) then you should connect the “Mixed” stereo
output of the DVD89 player to your receiver or integrated amplifier (and
immediately start saving for an upgrade!) Setting up, you have the
following choices:
No Surround Speakers: If the audio system does not have surround
speakers, please use the analogue RCA-style cables and set the
Speaker Setup Page > Down-mix to “Stereo” or “V. Surround”.
Surround, But No Dolby Digital or DTS Support: If the audio system
has surround speakers and Dolby Pro Logic Surround support, please
use the analogue RCA-style cables set the Speaker Setup Page >
Down-mix to “Left/Right”.
Surround Speakers and/or DTS and/or Dolby Digital Support: If your
receiver supports Dolby Digital and/or DTS then please use a digital
coaxial or optical cable and set the Audio Setup Page > SPDIF Output
to “Raw”. No additional audio cables will be needed unless you listen
to SACD (see opposite).
Use the best available audio connection
Audio In Coaxial In
Optical In
azur 640R
AV Receiver
Volume
Phones Tuning Mode/Store
DVD Video 1
Stereo
Modes
Dolby Digital/
DTS Surround
Modes
Pro Logic/Neo/
DSP Surround
Modes
Video
Input Type
Audio Video S-Video
Audio
Input Type
Video 2 Recorder 1 Aux CD Recorder 2 7.1 Direct
–+Standby / On
Analog
Stereo Direct
Optical
Tuner FM/AM
Video 3 L R
Digital Processing Options
Mute
Off
Manufactured under license from Dolby Laboratories. “Dolby” and the
double-D symbol are trademarks of Dolby Laboratories. “DTS” and “DTS
Digital Out” are trademarks of Digital Theater Systems, Inc.
Speaker Setup Page > Downmix* settings:
Left/Right, Stereo, V.Surr, 5.1CH *does not
affect digital player outputs.
EQ Type
Sound Field
SPDIF Output
LPCM Rate
Audio Tone
Pro Logic II
Dolby Digital Setup
HDMI Audio
None
Off
Raw
48K
00
On
Audio Setup Page > SPDIF Output* settings:
Raw, PCM *does not affect analogue player
outputs
BESTGOOD
Connect ONE of these digital
audio cables: Coaxial
S/PDIF or Optical S/PDIF
AV Receiver/Integrated Amplifier
Rear Panel
ENGLISH