Filter
Top Products
LEFT
300mA
15VDC
POWER
IR REPEATERS
800
1000
600400
0
200
CAT-5
VIDEO OUT
DIGITAL OUT
AUDIO OUT
VIDEO IN
DIGITAL IN
AUDIO IN
RIGHT COAX OPTICAL
LENGTH
ADJUST
(in feet)
VIDEO S-VIDEO
PCM/AC3/DTS
power
s-video
video
digital IR
SVC-10
The SVC-10 is a complete audio/video/IR over CAT-5 tranmission
system. Each SVC-10 includes a rack-mountable transmitter and
a small receiver unit. The SVC-10 can transmit either composite
video or S-video and either Pro-logic encoded analog stereo or
Digital audio. The SVC-10 transmitter can be adjusted to
compensate for CAT-5 cable losses up to 1000 feet. In addition, an
IR target can be used with the receiver to control the remote source.
CONTROLS AND CONNECTIONS
Transmitter
Front
Transmitter
Back
Receiver
Front
Receiver
Back
Shows either composite or s-video source
LED lit when transmitting digital audio
LED flashes during IR data transmission
Power LED is always lit when unit powered
2
Power supply input
Left analog audio input
Left analog audio output (loop through) S-video output
Composite video output (loop through)Right analog audio output (loop through)
Digital audio coax output (loop-through)
CAT-5 output
IR emitter ports (2)
Right analog audio input Cable length adjust
Digital audio coax input S-video input
Digital optical audio input Composite video input
POWER
LEFT
AUDIO
RIGHT DIGITAL
AUDIO COAX
VIDEO S-VIDEO CAT-5 IR INPUT
power IR
SVC-10R
Power supply input
Left analog audio output
Right analog audio output
Digital audio coax output
Composite video output
S-video output
CAT-5 input
IR target input
Flashes during IR transmission
Power LED lit while unit powered
OVERVIEW
7
FREQUENTLY ASKED QUESTIONS
Q: Can I transmit composite video from one source and s-video
from another source at the same time?
A: No, the SVC-10 can only handle either composite or s-video -
not both.
Q: Can I connect a CD player’s left&right analog outputs and the
digital coax from a DVD to the SVC-10?
A: Yes, but only one device can be used at a time. If you are
transmitting digital audio, make sure your CD player is off.
Likewise, if you are using the CD player, make sure the DVD
player is off.
Q: What happens if I use both the coax digital and optical
connector at the same time?
A: The coax digital always overrides the optical signal. When
the coax digital connector is plugged into the unit, the optical
signal is ignored, even if there is no signal on the coax cable.
Q: Can the SVC-10 transmit farther than 1000 feet?
A: Yes, but the system only compensates for up to 1000 feet.
The SVC-10 is optimized for lengths from 0 to 1000 feet.
Operating beyond this is possible but not recommended.
Q: Can I expand the SVC-10 using an expansion panel to
connect several receivers to a single transmitter?
A: No, the SVC-10 system is designed to work point-to-point. It
is not designed to be expanded at this time.
Q: What digital formats is the SVC-10 compatible with?
A: All commonly available formats such as PCM, Dolby Digital®
(AC-3), Dolby Digital Surround EX , DTS and DTSES .
Q: How do I set the length adjustment if I don’t know how long
my CAT-5 run is?
A: You can adjust the control until the picture looks normal for
contrast and brightness.
®® ®