Filter
Top Products
PSMH2485 Installation Instructions
6
CAUTION: IMPROPER INSTALLATION CAN LEAD TO
MOUNT FALLING CAUSING SERIOUS PERSONAL
INJURY OR DAMAGE TO EQUIPMENT! DO NOT
overtighten hardware!
5. Secure mount to studs using 5/16 x 2-1/2" lag screws [not
included] and 5/16" flat washers [not included] (8 if 24"
center studs and 12 if 16" center studs). (See Figure 3)
Figure 3
Display Installation
WARNING: IMPROPER INSTALLATION CAN LEAD TO
MOUNT FALLING CAUSING SERIOUS PERSONAL
INJURY OR DAMAGE TO EQUIPMENT! DO NOT substitute
hardware.
1. Move Q-Latches on mount to the OPEN position.
(See Figure 4)
Figure 4
2. Install four mounting buttons (2 of E, 2 of H) onto display
using four socket head screws (C or D). (See Figure 5)
IMPORTANT ! : The two mounting buttons with the notch
in them (H) should be used as the top mounting buttons.
3. Lift display following lifting instructions provided by display
manufacturer.
4. Align mounting buttons on display with teardrop mounting
holes in mount. (See Figure 6)
5. Move display forward until recessed area of mounting
buttons is positioned over lower area of teardrop mounting
holes. (See Figure 6)
6. Lower display until recess area of mounting buttons is
seated in lower area of teardrop mounting holes.
(See Figure 6)
(8 places when 24" centers on
studs--12 places when 16" centers
on studs)
5
Q-Latch
OPEN
1