Cisco Systems 8540HDC DVR User Manual


 
11
Connecting to an HDTV with an HDMI Connector
Required cables:
1 HDMI-to-HDMI cable
Important Notes Regarding the HDMI Interface on the Set-Top
The HDMI interface automatically con gures the audio output for a format supported by the television. Because not all
TVs support the Dolby
®
Digital input, the HDMI interface may automatically select a 2-channel stereo audio con guration
instead of Dolby Digital, which it carries over to the other digital audio outputs of the set-top. This prevents your home
theater system or Dolby Digital decoder from providing the full Dolby Digital surround-sound effect.
You can override this con guration by completing the following steps.
1. Press SETTINGS twice on the remote control to open the General Settings menu.
2. Press MOVE UP or MOVE DOWN to select the option Audio: Digital Out.
3. Press MOVE RIGHT to select Dolby Digital. This setting will send Dolby Digital audio to the HDMI, DIGITAL
AUDIO OUT, and OPTICAL AUDIO OUT connectors on the set-top.
Notes:
If the TV is not Dolby Digital capable, it may not produce audio through its speakers when the Audio: Digital Out
setting on the set-top is set to Dolby Digital. You can either switch the Audio: Digital Out setting back to HDMI
when you are not using the home theater or Dolby Digital decoder, or you can connect the baseband audio outputs
(OUT 1 Audio Left and Right) to the TV.
Digital content is encrypted with High-Bandwidth Content Protection (HDCP) on the DVI/HDMI port. This set-top
is not compatible with devices that do not support HDCP. You must use either the YPbPr or 1394 connection to
connect the set-top to these devices.
CABLE OUT
S-VIDEO
OUT
USB 2.0
120VAC
60Hz 80W
120 VAC
60Hz 4.2A
500W
OPTICAL
AUDIO
OUT
MULTI-STREAM CABLE CARD
VIDEO
ARCHIVE OUT 1
L
R
VIDEO
L
R
Pb
Y
Pr
DIGITAL
AUDIO
L
R
IR
1394 1394
eSATA
CABLE
IN
M-CARD SN: PKCPKPDBT
M-CARD MAC: 001AC326910A
THIS DEVICE IS INTENDED TO BE ATTACHED TO A
RECEIVER THAT IS NOT USED TO RECEIVE OVER-THE-AIR
BROADCAST SIGNALS. CONNECTION OF THIS DEVICE
IN ANY OTHER FASHION MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS
AND IS IN VIOLATION OF THE FCC RULES, PART 15.
AVI S:
RISQUE DE CHOC
ELECTRIQUE NE PAS OUVRIR
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
SCIENTIFIC-ATLANTA, INC.
CATV CONVERTER
MADE IN MEXICO
LISTED 14H1
VIDEO PRODUCT
eCM MAC: 001AC3F4F757
STB RF MAC: 001AC3F$F756
STB SN: SABPQBQGD
C
ABLE OUT
S
-VIDE
O
OU
T
U
SB 2.
0
120VAC
C
60
Hz
80W
1
20 VA
C
6
0Hz 4.2
A
500
W
OPTICAL
A
UDI
O
OUT
MULTI-
S
TREAM CABLE CAR
D
V
IDE
O
A
R
C
HIVE
O
UT
1
L
R
V
IDE
O
L
R
Pb
Y
Pr
r
r
D
I
G
ITAL
A
UDI
O
L
R
IR
1394 1394
eS
AT
A
C
ABL
E
IN
M
-CARD SN: PKCPKPDB
T
M
-CARD MAC: 001AC326910A
CABLE
IN
Back of HDTV
HDMI
AUDIO
CENTER
CHANNEL IN
AUDIO IN
DVI/HDCP
ANT (75 )
INOUT
LR
ANT-1
HD 2
Y
OUT
ANT-2
PB
PR
L
R
VIDEO
L/
MONO
R
L/
MONO
R
AUDIO
IN
ON OFF
IN
HD 1
S-VIDEO
VIDEO
Y
PB
PR
L
R
AUDIOAUDIO
Explorer Set-top
Cable
Input
T13666
WARNING: Electric shock hazard! Unplug all electronic devices before connecting or disconnecting
any device cables to the set-top.