Cisco Systems 8540HDC DVR User Manual


 
3
Back Panel Connectors
1 Cable In Connects to a coaxial cable that delivers the signal from your service provider
2 Set-Top Bar Code Contains set-top serial number and MAC addresses
3 Archive Video Connects to a video input of an archive device
4 L-R Audio Archive Connects to an audio input of an archive device
5 Video 1 (Composite) Connects to a video input of another device, such as a TV or VCR
6 Audio Out (Left/Right) Connects to RCA cables that send analog audio signals (left/right) to a stereo receiver
or TV with stereo inputs
7 YPbPr Connects to the component video input (YPbPr) on an HDTV. Do not use
these cables if you are using the HDMI connection
8 Out 2 Connects to either a VCR or to another set of inputs (composite) on your TV
(Secondary Audio Out)
9 Digital Audio Out Connects to an RCA cable that sends a digital audio signal to a surround-sound receiver
or other digital audio device
10 S-Video Out Connects to S-Video input of a standard TV or VCR
11 IR Connector reserved for future use
12 Optical Audio Out Connects to an optical cable that sends a digital audio signal to a surround-sound
receiver or other digital audio device
13 Cable Out Connects to a coaxial cable that sends analog audio and video signals to a TV or VCR.
These signals are SDTV video and stereo audio
14 HDMI Connects an HDMI
cable to the HDMI input of an HDTV. HDMI supports both digital audio
and video. May be used to connect to a DVI interface using an HDMI-to-DVI adapter for
video and separate audio connections. Any of the following audio connections may be used:
Digital Audio Out (9); Audio Out: Left, Right (6); or Optical Audio Out (12)
15 M-CARD Installed by your service provider
16 USB 2.0 Connects to external USB devices (Reserved for future use)
17 eSATA Connects an external Serial ATA (eSATA) hard disk drive for expanded drive space.
A connected eSATA drive is not an archival device. Your service provider may not
support all eSATA hard drives
18 M-CARD Code Label Contains M-CARD serial number and MAC address
19 1394 Connects to display devices equipped with a 1394 input
20 Ethernet Connects to an Ethernet-equipped device (Reserved for future use)
21 AC Outlet Connects to the AC power cord from another device, such as a TV
22 AC Power Input Connects to the power cord to deliver power to the set-top
Note: This illustration may vary from the actual product.
THIS DEVICE IS INTENDED TO BE ATTACHED TO A
RECEIVER THAT IS NOT USED TO RECEIVE OVER-THE-AIR
BROADCAST SIGNALS. CONNECTION OF THIS DEVICE
IN ANY OTHER FASHION MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS
AND IS IN VIOLATION OF THE FCC RULES, PART 15.
CABLE OUT
S-VIDEO
OUT
USB 2.0
120VAC
60Hz 80W
120 VAC
60Hz 4.2A
500W
OPTICAL
AUDIO
OUT
MULTI-STREAM CABLE CARD
VIDEO
ARCHIVE OUT 1
L
R
VIDEO
L
R
Pb
Y
Pr
DIGITAL
AUDIO
L
R
IR
1394
AVI S:
RISQUE DE CHOC
ELECTRIQUE NE PAS OUVRIR
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
1394
eSATA
CABLE
IN
SCIENTIFIC-ATLANTA, INC.
CATV CONVERTER
MADE IN MEXICO
LISTED 14H1
VIDEO PRODUCT
eCM MAC: 001AC3F4F757
STB RF MAC: 001AC3F$F756
STB SN: SABPQBQGD
M-CARD SN: PKCPKPDBT
M-CARD MAC: 001AC326910A
T13663
19
119
7 864 16
13
1 2 14
15 1810
17 20 22
12
3 215