Filter
Top Products
Page 22 of 28 9323 Owner’s Manual •
••
• (V 2.1)
Menu Item Format Description
Card Name Up to 6 ASCII
This gives the board a
unique name that will
show up in the device list.
Selected Preset Range (1 - 16)
Loads parameters
previously saved.
Preset Name Up to 6 ASCII
Gives a unique name to
the preset being saved.
Preset Save Confirm
Saves the parameters as
preset selected and preset
name entered.
Preset Load Confirm
Loads parameters of
selected preset.
Presets
Reset Current
Preset
Confirm
Will load factory presets
and overwrite the save.
Menu Item Format Description
On
AES Pair 1-8 SRC
Bypass
Off
This will bypass sample
rate conversion on AES.
If bypassed AES rate
must match input video
rate or audio dropout will
occur. SRC must be
bypassed to embed Dolby
encoded audio.
On
AES Pair 1-8
Passthrough
Off
AES output pair X will
be a low latency copy of
AES input pair X.
On
AES Input
Controls
AES Pair 1-8
Zero Delay
Off
Embeds with low (<1 ms)
latency. Overrides routing
choices.
Menu Item Format Description
Video Gain
Range 0-2000 Gain applied to Y (Luma).
1000 is unity.
Video Lift
Range (-999) – 999 Lift applied to Y (Luma),
in 10 bit code value.
Color Gain Range 0-2000
Gain applied to C
(Chroma). 1000 is unity.
Color Phase Range (–360) – 360
Phase of C (Chroma) in
degrees.
Video Proc
Reset to Unity Confirm
Resets all of the proc
controls to unity.