COBY electronic DVD233 DVD Player User Manual


 
Page 22 Coby Electronics Corporation www.cobyusa.com Page 23
Page 22 Coby Electronics Corporation www.cobyusa.com Page 23
PLAYER FUNCTIONS
Repeat A-B Mode
To repeat a specic section of a disc (play on a loop):
Press A-B to set the desired start point (“A”) of the section to be repeated.
Press A-B again to set the desired end point (“B”) of the section to be repeated.
The section “A-B” will now play repeatedly as a loop. Press A-B again to resume normal
playback.
Multi-Angle/Subtitle/Audio
During playback of a DVD that has been mastered with multiple angles, press ANGLE to view
the available alternate camera angles. (A DVD may have up to 9 selectable angles.)
During playback of a DVD that has been mastered with subtitles, press SUBTITLE to view the
available subtitle tracks. (A DVD may have up to 32 selectable subtitles.)
During playback of a DVD that has been mastered with alternate language/audio tracks, press
AUDIO to hear the alternate tracks. (A DVD may have up to 8 selectable audio tracks.)
Zoom
Press ZOOM to change the magnication level of the picture.
During DVD playback, each successive press of ZOOM will change the level of magnication
to: Zoom x2, Zoom x4, Normal.
During JPEG CD playback, each successive press of ZOOM will change the level of magni-
cation to: 25%, 50%, 100%, 150%, 200%.
When the magnication level is greater than Normal/100%, use the NAVIGATION keys to pan
around the magnied picture.
When the magnication level is equal to 100%, use the NAVIGATION keys to rotate the picture.
Note: The picture quality will decrease as the zoom level (magnication) increases.
Program/Random
To play tracks in random order, press PROGRAM twice to display “Random” and then press EN-
TER to conrm.
To create a custom sequence of tracks to be played, press PROGRAM three times to display
“PROGRAM” and then press ENTER to conrm.
(Program mode is available only when the player is in NAVIGATE OFF mode. Press the PBC
key to set the player to NAVIGATE OFF mode.)
Note:
Use the numeric keypad to input numbers directly to the elds. Use the navigation keys to move
between entry elds.
1.
2.
3.