Filter
Top Products
Page 12 Coby Electronics Corporation www.cobyusa.com Page 13
Page 12 Coby Electronics Corporation www.cobyusa.com Page 13
Remote Control Battery Installation
Refer to the diagram. Remove the battery
compartment cover located on the rear of the
remote control. Insert batteries, making sure
to match their polarities (+/-) to the markings
on the inside of the compartment. Replace
the cover.
To use the remote, point it at the remote sen-
sor of the player. Operate the remote within
15 feet of the sensor and at an angle of +/- 60
degrees.
Batteries in the remote will last for approxi-
mately 1 year. Replace the batteries if the
remote control does not work. Do not mix old
with new batteries, or different types of bat-
teries.
Remove the batteries from the remote if it will
not be used for a long period of time.
Thebatteriesusedintheremotecontrolmaypresentareorchemicalburnifmis-
treated. Do not recharge, disassemble, incinerate, or heat the battery (~212°F).
Keep batteries away from children.
•
•
•
•
GETTING STARTED
The remote control transmits a directional infrared beam. Be sure to aim the remote con-
trol directly at the infrared remote sensor during operation. The sensor may not be able
to receive signals properly if the sensor is covered, if there is a large object between the
remote control and the sensor, or if it is exposed to direct sunlight or a strong articial light
(e.g., uorescent or strobe lights). If possible, change the position of the light source or
reposition the unit to avoid direct lighting.