COBY electronic DVD-755 DVD Player User Manual


 
Page 12 Coby Electronics Corporation www.cobyusa.com Page 13
Page 12 Coby Electronics Corporation www.cobyusa.com Page 13
CONNECTIONS
Standard Television Connection
Green
Yellow
To TV Composite Video Input
To TV Component Video Input
RedBlue
Y
Y
Connect the player’s Composite Video Output to the TV’s
Composite Video Input (yellow).
Connect the player’s 2-Channel L&R Audio Outputs to the
TV’s L&R Audio Inputs (red/white).
Connect the player’s Component Video Output to the TV’s
Component Video Input (red/green/blue).
Connect the player’s 2-Channel L&R Audio Outputs to the
TV’s L&R Audio Inputs (red/white).
The player is equipped with composite AV outputs at the
rear panel (yellow/red/white). Your TV will require at least
one set of AV inputs. The supplied AV patch cord will
connect your player’s AV output to your TV’s inputs.
Depending on the brand of your TV, you may need to
press a button labeled “Line”, “Input”, or “Video/TV” in
order to set your TV to the correct input line. This will
switch the TV from broadcast reception mode to on of
the AV input signals. (Some TVs may have more than
on AV input line.
The player is equipped with 2-channel stereo or 5.1-
channel surround sound outputs on the rear panel. For
stereo or surround sound, a Stereo TV or Surround AV
receiver is necessary. For Mono TVs, you can connect
either the Left or Right stereo audio output to the Mono
TV’s audio input.
White
Red
White
Red
Progressive Scan Video (480p) Connection