Filter
Top Products
www.cobyusa.com Page 35
English
System Setup
Angle Mark
Set this item to ON. When a disc encoded with multiple camera
angles is playing, the angle mark will display on the screen. Then you
can view the video of dierent camera angles by pressing <ANGLE>
on the remote control.
Set this item to OFF to disable this function.
This function only works with those discs mastered with multiple
camera angles.
OSD Language
Set the language of the on-screen display and system menus with
this item.
Screen Saver
ON: If the image remains motionless on the screen for several min-
utes, (e.g., the disc is paused, stopped etc.,) a screen saver will appear
on the screen. You can press any key or button except <STANDBY>
to wake it up. The unit will go into the standby mode after about
minutes being in the screensaver mode. You can press <STANDBY>
to switch it on.
OFF: Disable the screen saver function.
Last Memory
ON: During playback or in the paused/stopped mode when you
open the disc tray, the unit will memorize the last playback time. The
next time that you insert the same disc and close the disc tray to
load the disc, the unit will play from the memorized point.
OFF: Disable the Last Memory function.