Filter
Top Products
© 2001 Firstech, Inc. Page 6
Note:
- meand pressing the button for 2 seconds.
( ) means simultaneously pressing the buttons
( ) – means simultaneously pressing the buttons for 2 seconds
Remote-Pager Learn Routine
If you replace or add additional remotes, you can program up to three remotes,
please perform the following procedure:
Step 1: Activate Valet/Programming mode by manually turning the ignition on
and off five times (between Acc and On) with car key within a 10 second period.
The parking light will flash once with successful completion of this step.
Step 2: Within a 10 second period after cycling the ignition for the 5
th
time, press
button I. The car parking lights will flash once to confirm that the transmitter has
been programmed. Continue program the additional remotes. The parking lights
will flash two times when the programming mode is expired.
Alarm Mode
You can arm or disarm alarm mode by pressing Button I for a ½ second.
Press Buttons (I+II) for a ½ second to make your car siren mute when arming or
disarming your vehicle. Keep in mind that your car siren will still activate for all
other modes (i.e. panic, alarm, shock sensor) regardless of whether or not your
car siren is in mute mode. The car siren will be mute only when arming or
disarming your vehicle.
In alarm mode, the starter kill function (this maybe an optional feature provided
by your installer) is activated. This feature disengages the starter mechanism on