Filter
Top Products
1. Press [MODE], then [CBL] to select the remote’s
cable mode.
2. Press [SETTINGS], then [ALL] together
until the
[TV] button illuminates.
3. Press [CH S]. The [TV] button will blink 3-times
and go out.
9. [MOVIES], [SPORTS], [NEWS] Buttons
Your remote has 3 Channel Memory Buttons –
[MOVIES], [SPORTS], [NEWS] (may be labeled
differently on some models). Each of these buttons
can store up to 5 cable channels. Each cable channel
can be up to 5-digits.
Some or all of your remote’s Channel Memory
Buttons may come pre-tuned to channels or functions
selected by your cable operator. If they have not
been pre-tuned by your cable operator, they can be
programmed as follows:
Programming [MOVIES], [SPORTS], [NEWS]
To program the [MOVIES] button to cable channels 1,
12, 123, 231 and 17, follow these steps:
1. Press [MOVIES], then [CBL] together
until the
[CBL] button illuminates.
2. Enter each channel as follows:
a. Enter 1
st
channel # - 001.
b. Press [CH +] to advance to next channel #
setting.
c. Enter 2
nd
channel # - 012.
d. Press [CH +] to advance to next channel #
setting.
e. Enter 3
rd
channel # - 123.
f. Press [CH +] to advance to next channel #
setting.
g. Enter 4
th
channel # - 231.
h. Press [CH +] to advance to next channel #
setting.
i. Enter 5
th
channel # - 017.
3. Press [MOVIES] to store the above channels. The
[CBL] button will blink 3-times and go out. To
store fewer than 5 channels, you can press the
[MOVIES] button any time after entering a
complete channel number.
4. Repeat the above steps to program the [SPORTS]
and [NEWS] buttons. Follow the example in step
1, but press [SPORTS] or [NEWS], then [CBL]
together
until the [CBL] button illuminates.
Using [MOVIES], [SPORTS], [NEWS]
Using the above programmed channels as an
example…
1. Press [MOVIES] – Cable set-top terminal tunes to
channel 001.
2. Press [MOVIES] again – Cable set-top terminal
tunes to channel 012.
3. Press [MOVIES] again – Cable set-top terminal
tunes to channel 123.
4. Press [MOVIES] again – Cable set-top terminal
tunes to channel 231.
5. Press [MOVIES] again – Cable set-top terminal
tunes to channel 017.
6. Press [MOVIES] again – Cable set-top terminal
tunes to channel 1…. repeat.
Whenever a Channel Memory button is pressed, the
function of the transport buttons will automatically
switch back to Cable.
When pressing the [MOVIES] button, be sure to keep
the remote control aimed at your Cable set-top
terminal to ensure the full channel numbers are
received in their entirety.
Resetting [MOVIES], [SPORTS], [NEWS]
To reset [MOVIES], [SPORTS], [NEWS], follow these
steps:
1. Press [MOVIES], then [CBL] together
until the
[CBL] button illuminates.
2. Press [MOVIES]. The [CBL] button will blink 3-
times and go out.
10. Operating Your Cable Set-Top Terminal
Your remote control is designed to operate all
the
features and functions of your digital set-top terminal.
To operate your CABLE set-top terminal, press
[MODE], then [CBL]. In your remote’s CABLE
mode
, you can then press…
[ALL] ALL devices on / off.
[CBL] Cable set-top terminal on / off.
[TV] TV on / off.
[VIDEO] VCR / DVD on / off.
[AUDIO] Audio on / off.
[CH S] / [CH T] Increases / decreases cable
channel.
[VOL S] / [VOL T] Increases / decreases volume.
[MUTE] Mute volume.
[EXIT] Exits on-screen menus, view
guide, interactive screens.
[SETTINGS] Displays program settings.
[GUIDE] Displays interactive program
guide.
[INFO] Displays channel, time
information.
[FAV] View favorite channels.
[LAST] Last channel viewed.
[A], [B], [C] On-screen decision buttons.
[0] - [9] Numeric entry buttons.
[PAGE S/T] Page up / down through menus,
program guide.
[], [], [], [] Navigate on-screen menus,
program guide, PPV events and
interactive services.
[SELECT] Select menu, interactive screen
item.
[BYPASS] Switch between set-top terminal
and TV.
[TV / VCR] Changes VCR Video inputs.
[VCR / VOD] “Toggles” the VCR buttons
between cable VOD (Video-On-
Demand) and VCR / DVD
functions.
Press [VCR / VOD]. If...
a. [CBL] illuminates, the VCR
buttons are operating your
cable VOD functions.
OR
[VIDEO] illuminates, the
VCR buttons are operating
your VCR or DVD functions.
b. While [CBL] or [VIDEO] is