Filter
Top Products
Child Lock
To lock the controls press Back and Enter for three seconds. Child Lock will
appear at the bottom of the screen. To unlock the control repeat the action of
pressing Back and Enter for three seconds.
Press and hold Enter for ve seconds to display the User Information menu;
SP Range (set point) allows adjustment of the maximum temperature.
Open Window detection (OW). When enabled the appliance will reduce the
target room temperature to limit the energy wasted when a window is opened.
Occupancy detection (OD) reduces the room temperature when the room
is unoccupied. Note: an additional accessory is required for this function.
Available summer 2015.
Anticipatory Control (AC) – to achieve the desired temperature at the onset
of the timed Comfort On period the appliance anticipates when it needs to
start heating prior to the onset of the timed ‘on’ period. E.g. room is 16°C, with
21°C at 7am set on the timer. With AC on the control will start to heat the room
before 7am, reaching 21°C at this time. With AC o the heater will start to heat
the room at 7am and will reach 21°C after this time.
Factory reset returns all settings to the factory presets.
NOTE: The controls cannot
be adjusted when child lock
is active.
NOTE: Open Window
detection is enabled
by default. Anticipatory
control is disabled by
default.
Child Lock
User Info
SP Range
Open Window
Occupancy
Anticipatory
Factory Reset
User Information
17