Filter
Top Products
Crestron ML-500 Mini LCD RF Wireless Handheld Remote
Scrolling Through Favorites Using the FAV and PAGE Buttons
Hard Keys
ON
OFF
8
7
+10
0
4
1
a
2
5
h
d
MENU
INFO
9
ENT
6
3
b
c
EXIT
PREV
CH
+
-
VOL
MUTE
GUIDE
+
CH
-
The hard keys are used to switch power to the devices in your system and control
device-specific functions within the system.
ON/OFF
Use these buttons to switch power to the devices in your system. If the remote’s
batteries are running low, the bottom of the LCD display will flash “LOW
BATTERY”, whenever the ON button is pressed. Refer to “Installing/Changing the
Batteries” on page 8 for instructions on changing batteries.
Device Control
These hard keys consist of buttons for volume and channel control, accessing and
using on-screen menus, operating transport functions, a numeric keypad and a
thumbpad.
The numeric keypad may be used to select a channel when controlling a television,
while the transport controls may be used to control a VCR or DVD player.
The thumbpad moves in four directions and has a center button. It can be used to
navigate on-screen menus found on A/V devices as well as other functions. To select
an on-screen option with the thumbpad, press down on the center of the thumbpad.
LIGHT
L
I
G
H
T
Located on the right side of the remote, the LIGHT button is used to turn the
key/display backlighting on and off. For more information on backlighting, refer to
“Using the Backlight” below.
Programming Port
Located on the left side of the remote, the programming port is used by a Crestron
dealer to program the ML-500 for use with a Crestron system. Do not connect any
devices to this port.
Operations Guide – DOC. 6246 Mini LCD RF Wireless Handheld Remote • 7