Filter
Top Products
— Operating the UC-525
23
The
LEARN
icon appears
under the LEARN button.
First, press the button that
you want to become the
macro button. You can
choose a button from any
device screen.
Then record the macro by
pressing the desired
command buttons. For
details, refer to the next
section: Macro example
Press the LEARN button
to end the macro record-
ing for this macro.
If you want to record an-
other macro, press a
different macro run key
and record the macro.
To exit, press the LEARN
button.
Time Delays between macro commands
A chain of macro commands is usually played back quite quickly. If
necessary, you can set a time delay between each macro command.
Time delays are useful if your device needs time between two IR
commands. For example, after powering up your TV, it might take a
few seconds before it can recognize an Input command. For setting
time delays, refer to the next section, “Macro example”.