Filter
Top Products
39
Appendix DAppendix D
Pre-configured X10 Codes
The SR-525 comes with pre-defined device codes for X10 compatible
infrared transceivers for light and appliance control. Such transceiv-
ers are available from different vendors. These IR codes cannot be
learned during the normal learning procedure. Follow this procedure
to activate X10 codes on the device screen of your choice:
The device button that you configure with the X10
codes will be overwritten and your current configura-
tion will be lost.
• Press the “Learn” button for 3 seconds
• Unlock learn function by pressing the 4 displayed buttons
• Hold the device button you want to map the X10 functions to for 5s.
• Press the 4 displayed buttons
• Enter learning set code 01 by pressing: ‘0’ – ‘1’
• The remote beeps and exits into normal mode
This configuration can be deleted and recalled any time, see the
chapters for deleting IR codes and recalling original buttons.
Button X10 Function
Number Buttons 1-9 Channel number 1-9
Power All lights On
Mute All lights Off
Volume Up Channel Bright
Volume Down Channel Dim
Channel Up Channel On
Channel Down Channel Off