Curtis TV2740-Black CRT Television User Manual


 
Audio output: 2 speakers of 3W each
Audio output mode: RF-MONO, A/V STEREO
Antenna impedance: 75 ohm terminal
Output terminal: Video input 1vp-p/75 Ohm, audio input 400mV
Closed caption: NTSC/M receiving time (cc1-cc4/tt1-tt4)
OSD Language: English/French
Power: AC 90-130V, 50/60 Hz
Measurements
(Length Width Height):
20" – 600 x 482 x 445 (mm)
24" – 710 x 485 x 515 (mm)
27" – 777 x 500 x 577 (mm)
Net Weight: 20" – 21 kg, 24" – 28 kg and 27" – 35 kg
Accessories: one remote control
one instruction manual
two batteries (AAA)
Note: Design and specifications are subject to change without prior notice
TROUBLESHOOTING GUIDE
Should this unit exhibit a problem, check the following before seeking service:
Symptoms
Solution
Try different channel, if it is okay, it
is probably a station trouble
Check aerial connections on back
of set
Check aerial for broken wires
Re-orient aerial (if indoor type)
Probably local interference, such
as an appliance
Adjust fine tuning control
Adjust brightness control
Adjust contrast control
Check if station is broadcasting in
colour
Adjust colour control
Check if system switch is correct
Check if on/off switch is on
Check Batteries in Remote control
No picture, no sound
Poor sound, picture OK
Poor picture, sound OK
Weak picture
Blurred picture
Double image
Lines in picture
Distorted picture
Weak reception of some channels
Horizontal lines in picture
Picture rolls vertically
Poor colour
No colour in picture
Erratic performance from remote control
Remote Control does not work
On Screen Display control outside the screen