Filter
Top Products
4.Tuning procedure
4.1 Auto Search Function:
Automatic Search and Memory (ASM)
A.Press [MENU]key repeatedly
to select "TUNE".
B.Press[CH+]/[CH-]key to select "SIGNAL INPUT".
By repeatedly pressing [VOL+] key,signal
input mode will change as follows:
on the front of the unit or the remote control
AIR CATV(STD) CATV(HRC) CATV(IRC)
For Canada user,recommend CATV(STD) input mode.
C.Press [CH+]/[ ] keys to select "AUTO SEARCH".
D.Press[VOL+]/[VOL-] keys to start ASM and the tuner will scan for each
available channel in order to program it for direct selection.
CH-
4.2.FINE TUNING Function:Fine Tuning for current setting.
A.Use[CH+]/[CH-]keys to select "PROGRAM".Using [VOL+]/[VOL-] keys,
to change program Number.
B.Use [CH+]/[CH-] keys to select "FINE TUNE".
C.Use[VOL+]/[VOL-] keys to adjust for best tuning.
4.4.SKIP Function:Use to"SKIP"channels.After setting to"on",the
program will not be selected when pressing channel Up/down keys.
Use [CH+]/[CH-] keys to select"SKIP".Use[VOL+]/[VOL-] keys to
select "ON" or "OFF".
TUNE MENU
4.3.Program Function:Use to change program.
Use [CH+]/[CH-]keys to select"PROGRAM".Use[VOL+]/[VOL-]
keys to change Program Number.
-8-