Filter
Top Products
Play Discs
1. Press OPEN/CLOSE ( ) key
on the front panel and load the Disc on
the tray.
The label side should be facing upwards. For a Double-sided DVD Disc, put the
disc with label A/1 up.
2. Press OPEN/CLOSE (
) key again to close the tray and the disc will
be loaded.
3. The Disc will be played automatically.
For a DVD disc, it will show the Menu/Title Page on the screen.
For a CD, it will play the first track directly.
4. Press STOP (
) key if you want to stop the Disc playback You can
continue
playback by OK key (on the
remote
you have pressed stopped (Resume Play).
5. Press STOP key twice to have the Disc really stopped.
Pause Mode
This function is applicable for DVD and CD audio.
·For DVD , the picture will become static.
·For CD audio, it will become silent.
1. Press PLAY/PAUSE (
/
) key will cause the player to enter Pause mode.
2. Press OK key or PLAY/PAUSE key again will continue to Play mode .
OSD Language
There are 5 OSD languages embedded in the DVD Player.
1. Press SETUP key on the remote controller to enter the setup menu main
page.
2. Press the Navigation Arrows(
YUZV
) to choose Language Setup Page .
3. Go to the OSD LANG option and use the Navigation Arrows to do the selection.
4. Press OK key to confirm.
5. Press SETUP key again to resume the Setup menu.
DVD Menu Play
The DVD Menu Play function is only applicable for DVD movie. User can get the
Casting information, Production History, Movie Introduction etc. directly through this
function.
1. Press DVD MENU key on the remote controller to enter the Root Menu.
2. Use the Navigation Arrows (
YUZV
) or input the item index through the Number
keys (0-9) to do the selection.
3. Press OK key to confirm the selection.
DVD operations
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
[ ]
controller) and it will start at the location where