Filter
Top Products
25
C
HAPTER
F
OUR
: VCR O
PERATION
VCR O
PERATION
Playing a Video Tape,
continued
To return to the scene you
marked:
1 Press STOP.
2 Press FF or REW to return to
the scene you marked.
The TV/VCR stops the tape
when the counter reaches
“00:00:00.”
3 Press PLAY to view the scene
you marked again.
Using P.PLUS
Press P.PLUS to compensate for
a poor rental tape.
1 Insert a tape and press PLAY.
2 Press P.PLUS, and “Picture
Plus Off” appears on the
screen. Press P.PLUS again
to turn to “Picture Plus On”.
The Rental Picture Plus
functions only when a tape is
being played.
✔ If the tape is ejected and
reinserted, the Rental Plus
feature will be OFF.
Recording TV Programs
as You Watch
Recording
1 With your TV/VCR turned on,
and with a tape in the unit,
press SPEED.
✔ Be sure the record safety tab is
in place. For information on the
record safety tab, see page 40.
The tape speed appears in
the lower left corner of the
screen.
2 Press SPEED repeatedly until
the speed you want (SLP, SP)
appears.
✔ SP (Standard Play) is the most
common speed for recording.
For more information on tape
speeds, see page 40.
3 Select the television channel
you want by pressing CH▲
or CH▼ or by using the
number buttons.
If you are using the number
buttons to select the channel,
press 0 before a single-digit
channel number (for channel
5, press 0, 5).
4 Press REC on the remote
control.
The record indicator on the
control panel illuminates and
the TV/VCR begins recording.
✔ The TV/VCR automatically stops
recording when it reaches the
end of the tape.
✔ Press STOP at any time to stop
recording.
✔ Don’t change tape speeds while
recording; this may cause
picture distortion during
playback.
When you finish recording,
rewind the tape and remove
it from the TV/VCR.
Picture Plus : On
SP
CMC13410/19410 3/28/02 11:02 AM Page 25