Filter
Top Products
10
Automatically finds all channels available through the ‘RF IN’ source. The unit stores all the active
channels found, on the channel list. Inactive or weak channels may not appear on the list. In that
case, add missing channels manually with the Manual Scan menu.
The channel list created here can be seen in the Channel Edit menu.
1 Press [MENU] to display the on-screen menu.
2 Select the SETUP menu using […†] then press
[ENTER] or [√] to move to the second level.
3 Select the “Channel Scan” using […†] then press
[ENTER] or [√] .
4 Press [ENTER].
The channel search process begins.
You can skip the current scanning by pressing [ENTER].
You can stop the process by pressing [MENU] or [EXIT].
5 After the channel search is complete, the lowest
channel number found appears on the TV screen.
Channel Scan
Move
Prev.
CHANNEL √
OPTION
LOCK
√
Channel Scan
Channel Add
Channel Edit
Manual Scan
Selection
(RIGHT or ENTER)
leads you to the
Channel Scan.
ANTENNA
IN
RF 3/4
OUT
Processing Channel
scan...
DTV Ch.12
Press ENTER to stop
local channel scan.
CHANNEL MENU OPTIONS
Move
Prev.
CHANNEL √
OPTION √
LOCK √
Channel Scan
Channel Add
Channel Edit
Manual Scan
DA1S-GN1DAA-AN¿ 2007.11.15 4:34 PM ˘ ` 10 mac001 1200DPI 100LPI